Tobacco Harm Reduction Network (Thailand)

รวมบทความ ข่าวสาร งานวิจัย เกี่ยวกับเทคโนโลยีใหม่ๆ สำหรับผู้ที่ต้องการลดสารพิษจากการสูบบุหรี่แบบมวน และลดมลพิษให้กับคนรอบข้าง

IQOS 3 DUO

How to use your IQOS 3 DUO

(1) Tap the IQOS 3 DUO Pocket Charger button to check the battery level. If it’s low, plug the device
into a power outlet using an original IQOS AC adaptor and cable.
(2) To turn the IQOS 3 DUO Pocket Charger on or off, press the button at the top for 4 seconds.
Check the status lights on your IQOS Holder to see the battery level. Two lights mean it’s fully
charged and you can use it twice. One light means one use. No lights mean it’s time to recharge the
holder.
(3) To use your IQOS 3 DUO Holder, gently insert a HEETS stick. Don’t twist the HEETS stick. If you
do, you risk breaking the blade. After you’ve inserted the HEETS stick, press and hold the holder
button. You’ll feel a vibration and the lights will pulse slowly. That means the holder is getting ready.
When you feel two vibrations and both status lights are steadily on, that means you’re good to go.
(4) If you feel two vibrations again, that means your IQOS time is nearly up. Slide open the IQOS 3
DUO Holder, remove the HEETS stick, and slide the holder shut. Tap the holder button to see the
device’s status. Remember: one light means there’s one use remaining. You can enjoy another
IQOS experience or place the holder back in the charger.
(5) When your IQOS 3 DUO Holder is in the Pocket Charger, watch the lights on top of the Pocket
Charger. When it’s flashing, that means the holder is charging. When both lights are on, that means
you can take the holder out.

How to charge your IQOS 3 DUO

(1) Tap the IQOS 3 DUO Pocket Charger button to check the battery level. A flashing light at the top
of the Pocket Charger signals a low battery. Plug the IQOS 3 DUO Pocket Charger into a power
outlet using an original IQOS AC adaptor and cable. Now the flashing light indicates the battery’s
charging. When the status bar is full, that means you have a full charge, which is good for up to 20
uses.
(2) Check the status lights on your IQOS 3 DUO Holder. Two lights mean your holder is fully
charged and you can use it twice. One light means you only have one use left. No lights mean it’s
time to recharge your holder.
(3) Slide open your IQOS 3 DUO Holder, remove the HEETS stick, and then slide the holder shut.
Insert the IQOS 3 DUO Holder into the charger. Check the two small lights at the top of the charger.
When they’re flashing, that means the IQOS 3 DUO Holder is charging. When they’re steady, that
means your IQOS 3 DUO Holder is ready to use.
How to clean your IQOS 3 DUO
Cleaning shouldn’t be hard work. So our cleaner tool makes it easy.
(1) There’s no liquid involved in the cleaning process. Once your IQOS 3 DUO Holder is cool, after
at least 30 seconds from the last use, you can slide the cap off.
(2) Tap out any loose tobacco inside your IQOS 3 DUO Holder. Check that the cleaning tool is in
good condition. Now insert it to the end of your IQOS 3 DUO Holder. Don’t twist yet! Once the
cleaner is in the holder, twist the cleaner gently two or three times. When you finish, carefully
remove the cleaner.
(3) Every once in a while, you can also use the IQOS cleaning stick to clean inside your IQOS 3
DUO Holder. Remember to avoid the blade when you do so. And clean the cap, too, top and
bottom.
A clean IQOS means a great taste!
IQOS 3

How to use your IQOS 3

A quick step-by-step guide:
To begin your IQOS heated tobacco experience, follow these simple steps:
1. Check if your IQOS 3 Pocket Charger is turned on by pressing the charger button for 1 second.
Lights are showing on your charger? You are ready to go. If not turn on the IQOS 3 Pocket Charger
by holding down the charger button for 4 seconds or charge your device with the IQOS official cable
and AC Power Adaptor.
2. Open the IQOS 3 Pocket Charger door, insert the holder into the charger, and close the door.
3. Wait for the small light at the top to flash. This means your IQOS 3 Holder is charging.
4. Take the holder out of the charger and gently insert the HEETS tobacco stick into the IQOS 3
Holder (remember not to twist the HEETS tobacco stick).
5. Press and hold the IQOS 3 Holder button. After one vibration, the holder light will pulse slowly.
After two vibrations, the light will stay solid white. That means your IQOS is ready to use.
6. When the holder light fades out, your IQOS time has finished. But don’t worry! Just remove the
used HEETS tobacco stick and recharge your IQOS 3 Holder.
How to Charge Your IQOS 3
Don’t miss out on your IQOS moments. Make sure your IQOS 3 Holder and Pocket Charger are
always ready when you need them.
1. You should charge your IQOS 3 Holder after every use. To start, first remove the used HEETS
tobacco stick.
2. Then put the holder in the charger and close the charger door. The bar lights at the top will
indicate the IQOS 3 Holder charge level. When the small light flashes, that means the holder is
charging.
3. Wait a few minutes and the small light should stop flashing. That means your IQOS 3 Holder is
ready to go!
4. After enjoying 20 HEETS tobacco sticks, recharge the IQOS 3 Pocket Charger with the original
IQOS official cable and AC Power Adaptor.
How to Clean Your IQOS 3
Keeping your IQOS clean is important, especially if you want to get the optimal taste experience.
Thankfully, the IQOS 3 cleaning tool does most of the work for you:
1. To start the cleaning process, leave your IQOS 3 Holder to cool.
2. Take the cap off your IQOS 3 Holder and tap the holder to free any loose tobacco stuck inside.
3. Now remove the lid from the cleaner. Insert it into the holder and rotate the cleaner.
4. From time to time, you should also use the IQOS cleaning sticks to clean your IQOS 3 Holder
(use them gently).
5. Lastly, don’t forget to clean inside the IQOS 3 cap. It’s a good way to make sure the HEETS taste
you love is there for each and every experience.
IQOS 3 MULTI
How to use your IQOS 3 MULTI
A quick step-by-step guide:
1. Check if your IQOS 3 MULTI is turned on by pressing the button for 1 second.
Lights are showing at the bottom? You are ready to go. If not turn on the IQOS 3 MULTI by holding
down the button for 4 seconds or charge your IQOS with the IQOS AC Power Adaptor and cable.
2. Rotate the IQOS 3 MULTI lid and insert the HEETS tobacco stick. Push it gently down to the filter
line (make sure you don’t twist the HEETS tobacco stick).
3. Hold the button until it vibrates. The light will begin to pulse as your IQOS 3 MULTI heats up.
4. Your IQOS 3 MULTI will then vibrate twice and the light will turn solid white. This means you’re
ready to go!
5. When the light begins to pulse and your device vibrates twice again, that means your IQOS 3
MULTI time is almost finished.
6. When the light fades out, remove the used HEETS tobacco stick. Now you can use your IQOS 3
MULTI again whenever you want.
How to charge your IQOS 3 MULTI
1. Press the button on your IQOS 3 MULTI to check your battery level.
2. The bar light at the bottom will show how much charge is left in your IQOS 3 MULTI.
3. If your IQOS 3 MULTI battery has run out of charge, plug it into an electrical outlet and charge it
with the IQOS cable and AC Power Adaptor (check that the bar light is pulsing, since this confirms
that your IQOS is charging).
4. When the bar light is full again, you’re ready to go!
How to clean your IQOS 3 MULTI
Keeping your device clean is important, especially if you want to get the optimal taste experience.
Thankfully, the cleaning tool does most of the work for you:
1. First, let the IQOS 3 MULTI cool down.
2. Take the cap off of your IQOS 3 MULTI. Tap the MULTI to free any loose tobacco.
3. Take the lid off of the cleaner. Gently insert the cleaner into your IQOS 3 MULTI and rotate only a
few times.
4. From time to time, we advise using the IQOS cleaning sticks. Do it gently and don’t forget to them
inside the cap. A clean IQOS gives you the great taste of real tobacco.
IQOS 2.4 PLUS
How to use your IQOS 2.4 PLUS
A quick step-by-step guide:
To begin your heated tobacco experience switching from cigarettes to IQOS, follow these simple
steps.
1. Check if your IQOS 2.4 PLUS Pocket Charger is turned on by pressing the charger button for 1
second.
Lights are showing on your charger? You are ready to go. If not turn on the IQOS 2.4 PLUS Pocket
Charger by holding down the charger button for 4 seconds or charge your IQOS with the IQOS
official cable and AC Power Adaptor.
2. Open the hinge lid, insert the IQOS 2.4 PLUS Holder into the charger, and close the hinge lid.
Wait for the small light to flash. This means your IQOS 2.4 PLUS Holder is charging.
3. Take the holder out of the charger and gently insert the HEETS tobacco stick into the holder
(remember not to twist the HEETS tobacco stick).
4. Press and hold the holder button. After one vibration, the holder light will pulse slowly. When the
light stays solid white, your IQOS 2.4 PLUS Holder is ready to use.
5. When the holder light fades out, your IQOS time has finished. But don’t worry, just remove the
used HEETS tobacco stick, and recharge the holder.
How to charge your IQOS 2.4 PLUS
Don’t miss out on those IQOS moments. Make sure your IQOS 2.4 PLUS Holder and Pocket
Charger are always ready when you need them.
1. You should charge your IQOS 2.4 PLUS Holder after every use. To start, first remove the used
HEETS tobacco stick.
2. Then put the holder in the charger and close the hinge lid. When the light flashes, that means the
holder is charging.
3. Wait a few minutes and the small light should stop flashing. That means your holder is ready to
go.
4. After enjoying 20 HEETS tobacco sticks, recharge the charger with the IQOS official cable and AC
Power Adaptor.
How to Clean Your IQOS 2.4 PLUS
Keeping your IQOS 2.4 PLUS clean is important, especially if you want to enjoy that great IQOS
taste.
1. To start the cleaning process, leave your IQOS 2.4 PLUS Holder to cool.
2. Take the cap off your IQOS 2.4 PLUS Holder and tap the holder to free any loose tobacco stuck
inside.
3. Now remove the lid from the IQOS cleaner. Insert it into the holder and rotate the cleaner.
4. From time to time, you should also use the IQOS cleaning stick to clean your IQOS 2.4 PLUS
Holder (use it gently).
5. Lastly, don’t forget to clean inside the IQOS 2.4 PLUS Cap. It’s a good way to make sure the
HEETS taste you love doesn’t go away.
Source: https://ch.iqos.com/en/support/iqos/3-duo-learn-more